FREE SHIPPING ON ALL ORDERS OVER $49!
YouTune is the new handlebar mounted controller putting a technological revolution in your hands. A compact and innovative calibration device allowing to customize your bike’s performance in real time, whether you are on the street or on a race track.
To be purchased as a separate accessory for installation with Rapid Bike EVO and Rapid Bike RACING modules.
The newest generation of the original Lithium Motorsports Battery. Speedcell's Legacy Series is built on our signature of small, lightweight, high capacity and 100% Designed, Built and Delivered from their facility right here in the USA.
600cc - 1200cc for Street and Standard Application
600cc - 1400cc for Racing Application
(1) Legacy 5.0Ah Superbike Battery
(1) Universal Ring Terminal Harness
(1) Industrial Strength Mounting Velcro
(1) Sticker Pack
Low Maintenance - Your Speedcell battery arrives fully charged & performance load tested, ready for use. No maintenance charge is required to maintain capacity of your Speedcell battery as long as your motorcycles charging circuit (stator and voltage regulator) are in good working order. To counter the affects of parasitic draw over long periods of inactivity / storage, we recommend that you simply disconnect your Speedcell battery until you are ready to ride again. No other action or again maintenance charge is required. In a disconnected state, Speedcell batteries have a shelf life of 10 years.
Safety - In the event of a faulty charging (over charge or over discharge) issue Speedcell batteries are designed to prevent or reduce the chances of thermal runaway through circuit interruption. In addition our custom housings are constructed of flame retardant materials to further reduce fire hazards due to the events associated with thermal runaway.
Toolless Integration - Every Speedcell comes equipped with our Quick Disconnect System which has no exposed conventional terminal posts. This prevents any possibility of dead shorting, making the Battery safer than those with exposed terminals and allows for the rapid toolless connection and disconnection of the Battery. This type of connection is not vulnerable to vibration and therefore is a more reliable and secure connection than those found on a traditional terminal post setup.
Performance - Speedcell Power Systems lead the industry standard in high performance LiFePO4 batteries. With peak amperage capabilities exceeding 2X that of our nearest competitor and a 68% faster recovery rate, our performance is unparalleled in terms of repeatable brute power delivery. But it doesn't stop there, our proprietary build process ensures the lowest total impedance resulting high output consistency and total wattage delivered over the life of the battery.
Platform Technology - All Speedcell batteries can integrate with any motorcycle utilizing our universal harness adapter. If you find that your build calls for higher performance electrical components than the OEM system can provide, we also offer model specific Kit Battery harnesses that plug n play directly into your Speedcell battery. In addition all Speedcell batteries come equipped with multi function expansion port integrated into the battery housing. This expansion port is capable of providing not only a charge / diagnostic interface but also up to 3 additional 12V circuits, each capable of providing 3A of current. Giving you the end user a Plug N Play circuit expansion!
Cost Benefit - In a 10 year period the average rider can go through 6 lead acid batteries with an average cost of $110 / unit for a total of $660 in replacement costs. While our batteries may have a higher initial price point, our life expectancy is in excess of 10 years coupled with little to no maintenance required making the choice clear.
Race Proven Technology for YOU - With an unparalleled pedigree and almost a decade of championships Speedcell Technologies is the choice of professional race teams world wide seeing service in Moto America, Moto2 and WSBK. Our top tier technology, performance, innovation and reliability sought at the professional level is the very same that we deliver to you our customer. Whether you are hitting the streets on your cruiser, the MX track on your dirt bike or you are a hardcore club racer Speedcell has the right solution for you.
Capacity: 5.0Ah @ 13.2VDC
Discharge Profile: 240A Pulse @10 sec / 100A Continuous (above 12.0VCD)
STD: 1.0A @14.4VDC x 240min
Rapid: 5.0A @ 14.4VDC x 48min
Weight and Size:
12cm (L) x 6.4cm (W) x 8.4cm (H) / 4.7in (L) x 2.5in (W) x 3.3in (H)
.750kg / 1.65lbs
Made in AmericaView full product details
2015+ R1 owners are you tired of battery drained? Designed by EDR, these cables bridge between your battery and the stock negative ground terminal, allowing you to disconnect them quickly and easily when the bike is sitting for long periods. No longer will you have to deal with the infamous negative drain these bikes are prone to having! Made from very high quality connectors and thick gauge cables these stow away neatly!
Also comes with a thicker gauge wire pre-cut to length for your starter motor. These are much stronger at holding current and don't cause as much voltage drop during startup, putting less stress on the R1's battery.
***Made to order***View full product details
EDR PERFORMANCE ECU Flashing service including return shipping!
Please note if you have any questions or specific needs for us about ECU flashing, or any other product please call us T-F 9-6 PST Sat 9-5 PST)
This is a mail-in or walk in service. You can simply bring us or send us your ECU and we reflash it to our custom specifications along with what your application may require. Our turn around time is typically 48 hours or less (during business days). Please note, anyone can "flash" your ecu, we actually do more than almost any other shop in the country along with the fact we actually have and use a Dyno to develop our ECU specs and settings! We can also on some models include a perfectly match fuel map to work with your specific exhaust (call or email for details) We also offer full customer support via email or phone after the flash. In addition we offer a free 30 day changes and or adjustments that you may need. We can return the ECU to stock if needed, free of charge as well.
These flashed ECU maps are the very same ones we use on our championship-winning bikes! We have multiple national championships, numerous overall club championships and thousands of individual class championships along with multiple track records! Our work on the dyno and race track translates to you the customer getting the very best ECU flash available! Do not settle for cheap cookie cutter flashes by some shop you've never heard or or that doesn't tune on the dyno or doesn't work at over 40+ track events a year with their clients 1:1.. demand quality! The ECU is extremely vital part of your motorcycle.
Depending on your motorcycle, you will see anywhere from +5 rwhp to over 45 rwhp! We remove all throttle and timing restrictions on the bike from the factory that limit your bikes potential. We are extremely dedicated to reliability and ride-ability first and foremost!
Various options we provide depending on your bike include:
Contact us if you are uncertain where the ECU is located. Most ECUs can be removed with simple hand tools and under 15 mins.
*Be sure to include your email contact with ECU! Once we receive your ECU we will contact you via email with questions on make, model, modifications, type of use, fuel used and other options that may pertain to your motorcycle if necessary.
The drop down menu below for models. Model YEARS are not listed, please contact us before you send your ECU to see if you can flash the specific year!
INCLUDED IN PRICE IS FREE RETURN SHIPPING! We insure each returned ecu for $300 and require a signature. If your ecu requires more or you would like more insurance please contact us first, this is available at an additional cost. International customers please email us before sending your ECU for flashingView full product details